FIDLOCK GmbH
Kirchhorster Str. 39
30659 Hannover
Information
FIDLOCK BIKE
SNAP helmet buckle
15 shaped broad durethan
sku
F7032-000002(BLK)
Sector
helmets
Opening mechanisms
slide laterally
Webbing width
15 mm
Weight
ca. 12 g
Dimensions (L x W x H)
46,8 x 28,0 x 13,4 mm
Material
PA6GFCF30, PP
Static breaking load N
638 N
Static breaking load KG
65 kg
Colour
black
Assembly
strap
ladderlock
single bar
Webbing thickness (single-layered; double-layered)
2,5 mm; 1,3 mm
Downloads & guides
Article description
The SNAP helmet buckle 15 shaped broad durethan was designed for up to 2,5 mm thick single-layered webbing or 1,3 mm thick double-layered webbing and features a static breaking load of 65 kg. It features an extended portion of the ladderlock (small nub). With this feature, the webbing can be secured with the custom-designed FIDLOCK anti-slip rubber part (not included), replacing conventional O-ring set-ups on helmets which only clamp the loose webbing end to the main webbing. In other words, FIDLOCK is providing a technically improved alternative to conventional O-rings, tailored to the SNAP helmet buckle. Only the original FIDLOCK anti-slip part can be used with the SNAP helmet buckle shaped broad (no use of conventional O-rings).
Safety instructions & further information
Anti-slip part available (article no. 07037). Approved only with the original FIDLOCK anti-slip part. Safe operation is only guaranteed when the original FIDLOCK anti-slip part is used. Safety warning: use of conventional O-rings might lead to malfunction.
Variant for thinner or single-layered straps available upon request.
Not suitable for the safety-related use on motorcycle helmets or equestrian helmets.
Field of application
The SNAP helmet buckle is designed for helmets and meets especially high safety and comfort demands.
Installation
SNAP helmet buckles are simply fixed to the ends of the straps in a double-layer arrangement.
Individualization
The SNAP helmet buckle can be applied with your individual design. Therefore, you can choose from possibilities including printed logos, the colouring of the logo shield or 3-D logos and reliefs of other illustrations.